BMX 'Feasibility Study' convergence
I spent today playing (or possibly fighting) with the Feasibility Study in BMX. I'm doing a flotation analysis, so I've got a model of the hull and a 'waterline' plane at a parametric pitch angle and...
View ArticleDid your Maintenance invoice go up?
My maintenance invoice went up 3% this year. Anyone else experience this? That Makerbot sure is looking like a bargain compared to PTC maintenance!
View ArticleCreate Wizard not closing when complete in Windchill 10.1
I have a create wizard with 2 steps in it that I brought over from my Windchill 9.1 installation into my Windchill 10.1 installation. The wizard was created using JSP with JCA tags. The wizard itself...
View ArticleTrying to change the Organization Internet Domain name
I just installed Windchill 10.2 and discovered that the Organization Internet Domain name was incorrect. Following an instruction document from PTC (CS115451) that gives instructions on how to change...
View ArticleClik here to view.
Numeric inaccuracy - bug? (MC15 and Prime)
This is a real strange effect. I know that the conversion from decimal to binary and back can result in numeric inaccuracy. Especially as numbers like 0.7 or 0.1 have a periodic binary representation...
View ArticleClik here to view.
Where can download Creo 3.0 Beta?
It seems that Creo 3.0 Beta is available to use for some customers, but it is still not in download list. Do you get Creo 3.0 Beta media?
View ArticleClik here to view.
how to measure area in drawing mode
hello,why you can measure area for 3D but not in 2d drawing? any ideas how to get proe developer to activate this function? i actually make use of the drawing to draw plan layout. i want to measure the...
View ArticleClik here to view.
Feature Failure with Repeating Patterns
Just recently I transfered from one division of my company to another. The first division used SolidWorks and the new division uses Creo. It has been over a decade since I used Pro/E so I am...
View ArticleHow to get intersection witness lines on driven dimensions?
I am unable to enable intersection witness lines for driven dimensions in the model. It is grayed out in the dimension properties dialog. They work perfectly if I create a non-driven dimension directly...
View ArticleMapping creator attribute in desktop integration
I recently added some custom attribute mapping in Desktop Integration per the instructions in document CS36657...
View ArticleDisplaying parameters as fractions
Is there any way to display a parameter in fractional form without using half a page of relations? Not dimensions, parameters. I know the functionality exists, because it's so easy to change dimensions...
View ArticleMulti-Language drawings in Productview - How to?
Hello, I would need advice regarding a requirement that I have for CAD drawings using Pro/E WF4 and Productview 9.1. It is regarding what we call "Multi-Language drawings". For our manufacturing...
View ArticleCreo2: Create 3D model Annotation/Note Flat to Screen with a Leader?
This could be done in ProE WF4, but it looks absent from Creo2. We can even place a 3D Note in the model with a leader but when we change it from a planar surface to Flat to Screen the Leader...
View ArticleHow to insert a PDF in detail
Hi I want to know how to insert a PDF in detail. normal we need to insert supplier's drawing (PDF format) in our frame, during the process we need to resize the PDF to right proportion (most of the...
View ArticleMulti-Language drawings in Productview - How to?
*I have posted this topic in the Manufacturing area, but did not have any replies in over a year. I hope this Visualization area will be better suited for this question* Hello, I would need advice...
View ArticleHow to integrate MS excel with creo 2.0.
Dear All, kindly give me tutorials for Excel integration with Creo.I want to control dimensions of assembly from Excel sheet.Is it possible?what are the differant ways to integrate creo with MS Excel.
View ArticleSlicing solid model to sketch inside it
Hello, New at Creo 2.0, but I was wondering does Creo 2.0 have a tool / command that allows you to sketch on a datum that runs through a solid part. In inventor and SolidWorks you can "Slice" the solid...
View ArticleClik here to view.
Fatal Error
I'm working with Creo Parametric 2.0. Many times i'm facing the "fatal error encountered" issue while working in drawing as well as in part modeling.Please tell me how to resolve this issue.
View ArticleI want to delete the parameters that intralink created
Hello all, I have some parts that are being taken out of ilink. I need to delete the parameters that were created by intralink. Can I do that somehow? I seem to remember discovering a way using some...
View Article